2
2
3
IMPORTANT INFORMATION
BATTERY INSTALLATION
Before playing, an adult must install fresh alkaline batteries in the HOVERBOARD and REMOTE.
HOVERBOARD
REMOTE CONTROL
1. Using a Phillips screwdriver (not included) remove the
screw and battery compartment cover from the back
side of the remote.
2. Install two (2) fresh 1.5V AAA alkaline batteries (not
included) making sure the (+) and (-) ends face the
proper direction as indicated inside the battery
compartment.
3. Replace the compartment cover and tighten the screw.
IMPORTANT NOTE:
In the event of a malfunction, reset the item by removing and replacing the batteries. If function is still not
restored, replace the batteries with fresh alkaline batteries.
QUICK START
The batteries included in the hoverboard are for in-store
demonstration purposes and should be replaced before use.
Here’s how:
1
2
3
5
6
Turn ON the remote control.
Move the switch on the hoverboard
from “TRY ME” to “ON.”
Insert the doll stand into the opening
on top of the hoverboard.
Connect the two halves of the loops on top of
the hoverboard according to the size of the doll’s
shoes. Then, insert the doll’s feet into the loops
and clip the doll stand around the doll’s waist.
Press the or button to move
the hoverboard forward or in reverse. The
lights on the hoverboard light up while
the hoverboard is in forward motion.
Press the or button to spin to
the left or spin to the right. The left or
right light on the hoverboard will light
up in the direction you are turning.
1.5V AAA / LR03
1.5V AAA / LR03
1.5V AAA / LR03
1.5V AAA / LR03
1.5V AAA / LR03
4
1. Using a Phillips screwdriver (not included) remove the
screw and battery compartment cover from the
underside of the hoverboard.
2. Install three (3) fresh 1.5V AAA alkaline batteries (not
included) making sure the (+)and (-) ends face the
proper direction as indicated inside the battery
compartment.
3. Replace the compartment cover and tighten the screw.
• Only one hoverboard can be used at a time.
•
The hoverboard must remain in remote control range to operate correctly. The range depends on the surrounding area and on the
strength of the battery. Obstructions such as buildings, fences, etc., between the remote control transmitter and the hoverboard
reduce the range.
•
The hoverboard is controlled by radio frequency. It may interfere with nearby devices such as cordless phones, radios,
walkie-talkies, or other radio controlled devices. If this occurs, move the hoverboard to a location away from the interference.
• Remove the doll’s jacket before attaching the elbow pads.
• Always turn the hoverboard and the remote to the “OFF” position after playing to conserve battery power.
• Do not use the unit i
n the street, anywhere there is vehicular traffic, or in heavily traveled pedestrian areas.
•
Do not stand or sit on or throw the hoverboard
as doing so can result in injury to the person and
damage to the unit.
•
Do not
run the hoverboard into furniture, walls, pets, people etc., as doing so may cause injury to the people and pets and
irreparable damage to the unit.
•
Keep long hair and loose apparel such as shoestrings away from the turning wheels of the hoverboard.
•
Do not drive the hoverboard through water or mud.
• Always use on a flat, level surface. The unit operates on some low-
pile carpet, but best performance is achieved on smooth flooring.
• Do not expose the hoverboard or remote to moisture of any kind.
•
DO NOT wash doll’s hair with water and/or soap.
• DO NOT dry doll’s hair with a hair dryer or subject hair to very high heat in any manner.
•
DO NOT operate this hoverboard during thunderstorms.
adjustable
