MG WHM-2020, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 20

MG WELDING WHM-2020
8. Maintenance
8.1 Only authorized and trained personnel are allowed.
8.2 Preventive maintenance consists of inspecting, adjusting and cleaning of the static
and dynamic parts of the whole mechanical unit. Regular inspection at intervals
dependent upon the service conditions are the best insurance against costly
breakdown.
Component Inspection/Action Interval
Electrical Panel Clean with light Compressed Air 3 months
Filter at Panel Replace 6 months
Pedant Open and clean 3 months
Bolt & Fastener Visual on corrosion, missing Weekly
Warning Labels Visual, replace where torn
Weekly
8.3 All moving parts, for example, bearings and couplings, are to be lubricated at
regular interval. Nipples are to be greased by means of a grease-gun, so that all
the internal moving parts can be lubricated, hence, prolong the life-span of the
whole mechanical unit.
Component
Inspection &
Action
Lubricant &
Detergent Code
Interval of Hours
Travel Car :
Slewing Ring
Grease B 1000 Hours
Mast – Plate :
Mast Way
Boom Way
Clean
Clean F
F As Necessary
As Necessary
Hoisting Assembly :
Leadscrew
Gearbox
Clean & Lubricate
Oil Top-Up
F
A
As Necessary after
cleaning
As Necessary
2000Hours or 18Months
14