OPERATION AND MAINTENANCE MANUAL
for Blind Staplers TOP B and TOP SP,
Blind Staplers TOP B EH and TOP SP EH
Page:
7
Mod.:
04_2013
ET 571
Seite 7 von 8 02.04.13 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP EH engl 0413.docx
11 Fundamental notes on the work technique and handling
Before the operator starts to use the tool he must be sure that the tool operates correctly.
Carefully observe all safety instructions!
Check to make sure that the stapling machine is not damaged and that it can be
operated in a safe way.
The safe operation state of the stapling machine must be checked each time before any work is started!
Keep your work area in order.
Disorder in the work area can cause accidents.
12 Shutting down
In case the tool will not be handled for some time, please remove all staples.
13 Maintenance and care
The stapling device does not require a great deal of care, but should be cleaned and maintained on a
regular basis.
Soiling should be removed directly by the operator after the machining processes.
Soiling on the work pieces can be blown away.
Any kind of alteration to the device (e.g. drilling of holes) is only permitted with
prior consent and written permission of the manufacturer.
Before the start of all major maintenance and cleaning, all safety precautions must be taken.
The following work processes/inspections should be performed by knowledgeable personnel on a
regular basis:
Clean the stapling head on a regular basis
Regular oiling of the movable parts (no graphite oil!) - on a weekly basis
Cleaning of cardboard dust
Only ORIGINAL
spare parts may be used. (see “spare parts list”)
Failure to comply will void any guarantee claim and exclude any liability!
Only original spare parts are subjected to our quality control. To ensure a safe and reliable operation,
only spare parts from the manufacturer may be used.
All technical equipment, especially the safety equipment, must be inspected by professional staff after a
modification or repair.
