4.
Press the DATE/TEMP button to adjust the minutes.
5.
To exit Alarm Time Setting Mode, briefly press the SET button.
Note: If no buttons are pressed for 1 minute after entering Alarm Time Setting Mode, the MFJ-
185 will automatically exit and return to Normal Time Mode.
In the Alarm Time Mode, press the 12/24
°
C/
°
F button t o enable the alarm. A small bell will
appear in the lower right corner next to the time when enabled. Press the 12/24
°
C/
°
F button
again t o disable the alarm and the bell will disappear. When the actual time reaches the Alarm
Time, the alarm will sound. To stop the alarm sound, press any button.
NEVER USE THE MFJ-185 WATCH FOR THE FOLLOWING:
•
Clinical thermometer
•
Temperature control for chemicals
•
Water temperature gauge submerged for many hours
•
Water temperature gauge for hot water exceeding 40
°
C (102
°
F)
