background image

MFJ-1768 Dual Band Yagi                                                                       Instruction Manual 

9  

 
 

FULL 12 MONTH WARRANTY 

 

 
 
MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by MFJ Enterprises, Inc. 
and purchased from an authorized dealer or directly from MFJ Enterprises, Inc. to be free from defects in 
material and workmanship for a period of 12 months from date of purchase provided the following terms of this 
warranty are satisfied. 

 

1.

 

The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, credit card or money 
order receipt, etc.) describing the product to establish the validity of the warranty claim and submit the 
original or machine reproduction of such proof of purchase to MFJ Enterprises, Inc. at the time of 
warranty service. MFJ Enterprises, Inc. shall have the discretion to deny warranty without dated proof-
of-purchase. Any evidence of alteration, erasure, or forgery shall be cause to void any and all warranty 
terms immediately. 

 

2.

 

MFJ Enterprises, Inc. agrees to repair or replace, at no charge to the original owner, any defective 
product under warranty provided the product is returned postage prepaid to MFJ Enterprises, Inc. with a 
personal check, cashiers check, or money order for 

$7.00 

covering postage and handling. 

 

3.

 

MFJ Enterprises, Inc. will supply replacement charges free of charge for any MFJ product under 
warranty upon request. A dated proof of purchase and a

 $5.00

 personal check, cashiers check, or money 

order must be provided to cover postage and handling. 

 

4.

 

This warranty is 

NOT

 void for owners who attempt to repair defective units. Technical consultation is 

available by calling (601) 323-5869. 

 

5.

 

This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, Inc. 

 

6.

 

Wired and tested PC board products are covered by this warranty provided 

only the wired and tested 

PC board product is returned.

 Wired and tested PC boards installed in the owner's cabinet or 

connected to switches, jacks, or cables, etc. sent to MFJ Enterprises, Inc. will be returned at the owner's 
expense unrepaired.  

 

7.

  

Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages to person or property 
by the use of any MFJ products. 

 

8.

 

Out-of-Warranty Service: 

MFJ Enterprises, Inc. will repair any out-of-warranty product provided the 

unit is shipped prepaid. All charges will be shipped COD to the owner. 

 

9.

 

This warranty is given in lieu of any other warranty expressed or implied. 

 

10.

 

MFJ Enterprises, Inc. reserves the right to make changes or improvements in design or manufacture 
without incurring any obligation to install such changes upon any of the products previously 
manufactured. 

 

11.

  All MFJ products to be serviced in-warranty or out-of-warranty should be addressed to 

MFJ 

Enterprises, Inc., 300 Industrial Park Road, Starkville, Mississippi 39759, USA 

and must be 

accompanied by a letter describing the problem in detail along with a copy of your dated proof-of-
purchase. 

 

12.

 

This warranty gives you specific rights, and you may also have other rights which vary from state to 
state. 

 

Содержание MFJ-1768










Отзывы: