MFJ MFJ-1270Pi, Инструкция по эксплуатации, Страница: 5 / 15

MFJ-1270Pi Raspberry Pi TNC Instruction & Technical Manual
from
https://www.raspberrypi.org/downloads
. There are versions for Windows, MacOS, and
Ubuntu Linux.
WARNING
Make absolutely sure you are copying the image file onto your SD card, not onto
your hard drive! The Imager
will overwrite everything on whatever drive you specify!
MFJ will take no responsibility for loss of data in this event!
After the imager finishes flashing the SD card, insert it into the slot at the base of the Raspberry
Pi. Connect a mouse, keyboard, and monitor to the appropriate ports on the Raspberry Pi then
power up the Pi. At first boot you will login with username “pi” and password “raspberry.” You
may change these later if you wish.
Figure 2: Opening the terminal
The Raspberry Pi’s serial port is disabled by default. To use it you will need to change the Pi’s
configuration. Open a terminal window. You can open it from the desktop as shown in Figure 2,
or you can open it remotely if you have SSH enabled. Type
sudo raspi-config .
-2-