
MFJ-1270Pi
Raspberry Pi TNC
Instruction & Technical Manual
1
THE MFJ-1270Pi
Thank you for purchasing the MFJ-1270Pi
Terminal Node Controller
™
. This TNC is designed to
perfectly match the popular Raspberry Pi (Figure 1), allowing expasion of existing systems to
support TNC-based operations. The open-source Raspbian operating system provides a powerful
and flexible base upon which to build any packet station. From portable setups to large, fixed
stations, this board has been everywhere. The MFJ-1270Pi
Raspberry Pi TNC
™
supports the
packet TNC modes used for APRS iGates and Digipeaters and VHF packet for Winlink. It will
support HF Winlink with the addition of a Pactor or similar modem.
Figure 1: An MFJ-1270Pi stacked on a Raspberry Pi
2
SETUP
2.1
INSTALLING RASPBIAN
To use the MFJ-1270Pi, you will first need a working Raspberry Pi. These can be ordered directly
from the Raspberry Pi Foundation at
To install the Raspian Operating System on your Raspberry Pi, you will need to obtain a micro
SD card and install the OS image on it. The easiest way is to download the Raspberry Pi Imager
-1-
Содержание MFJ-1270Pi
Страница 15: ...USER NOTES...