MFJ Memory Keyer MFJ-493, Инструкция по эксплуатации

Страница: 17 / 28

MFJ-493 Instruction Manual
14
Menu D
Serial No. Store (SN)
Use Serial Number Store to set the current serial number. You must enter four numbers in Morse
code for a valid serial number. All numbers may not be in shorthand. For example, the number "1"
must be "
·–––– " and the number "0" must be " ––––– ". The serial number can be set from 0000 to
9999. See /N under Embedded Commands and also see Serial Number Decrement.
Iambic A or B (IX)
Use Iambic A or B to toggle between iambic a and iambic b. The keyer responds with the current
mode "A" or "B". The Iambic modes work when you squeeze both paddles together. See Iambic
On/Off. In iambic B mode the keyer plays the alternating element after the paddles are released
during an element. Iambic A mode does not produce an alternating element when the paddles are
released during an element. For example, a release during the dash in "
·–
" produces "
·–
" or "A" in
iambic a mode but produces " ·–· " or "R" in iambic b mode.
Paddle Reverse (RV)
Use Paddle Reverse to change the dot/dash paddle assignments. The keyer responds with "RV"
and changes the dot paddle to dash and the dash paddle to dot.
Hand Key (HK)
Use Hand Key to use your paddle or space bar as a hand {straight) key. The keyer responds with
"HK". Dots and dashes are made manually by using either key of the paddle or the space ban on
your keyboard or keyer terminal. You must exit this mode to use any other keyer feature by
squeezing the paddies or pressing Menu.
Random Code (RC)
Use Random Code to start the random code generator. Set the Random Code generator defaults
using the Command Mode. Use FA, R1 - 8 and the set selection numbers to customize your session
to study exactly what you need to learn. Squeeze paddles to exit.
QSO Simulator (QS)
Use the interactive QSO simulator to practice on the air contacts. Learn code the way that is used
on the air. After you press the QSO Simulator button you may send CQ and the keyer will answer
you. If you wait without sending CQ, the keyer will initiate the QSO and you can answer it.