MFJ Memory Keyer MFJ-493, Инструкция по эксплуатации

Страница: 14 / 28

MFJ-493 Instruction Manual
11
Speed Set (SP)
Use Speed Set (WPM) mode to change the speed of code. An alternating dot/dash is produced and
the speed is modified by using the paddles, keyboard or keyer terminal.
Paddle
Press either the dot or dash paddle to increase or decrease speed. Squeeze paddles to exit.
Keyboard
To enter speed set either press the speed set menu button or press F10 on the keyboard.
Press either the left arrow or right arrow to decrease or increase speed. Or press two num-
bers 05 to 99 to set the code speed. Esc exits.
Keyer Terminal
To use speed set with the keyer terminal either use the menu button or command mode in
the keyer terminal. Type "[co]SP". Press
and the < and > keys to change speed or
type in two numeric characters 05 - 99 to set speed. Press Esc to exit.
Weight Set (WT)
Use weight Set to modify the weight settings for code. An alternating dot/dash is produced and
the paddle, keyboard or keyer terminal is used to change weight.
Paddle
Press either the dot or dash paddle to increase or decrease weight. Squeeze paddles to ex-
it.
Keyboard
Press the weight set menu button. Press either the left and right arrows or the paddles to
change weight. Squeeze paddles or press Esc to exit.
Keyer Terminal
To use weight set with the keyer terminal either use the menu button or command mode in
the keyer terminal. Type [co]WT. Then use the < > keys to change weight. Press Esc
to exit.
Sidetone Set (Hz)
Use Sidetone Set to change the sidetone speaker frequency.
Paddle
Press either the dot or dash paddle to increase or decrease sidetone. Squeeze paddles to
exit.
Keyboard
To enter sidetone set, press the sidetone set menu button. Press either the left and right
arrows or the paddles to change sidetone. Squeeze paddles or press Esc to exit.
Keyer Terminal
To use sidetone set with the keyer terminal, either use the menu button or command mode
in the keyer terminal. Type [co]HZ. Then use the < > keys to change sidetone. Press
Esc to exit.