mFi MASON-LITE MFR16-48, Руководство владельца по эксплуатации и установке

Страница: 10 / 26

10
INSTALLATION (
Continued)
3. When starting second layer, stagger blocks to the
first layer (see Figure 8). For the MFR24-48, use 8
blocks to build the second layer. After laying out all
blocks, using a level, verify all the blocks are level.
Shim if necessary.
4 When starting the top layer, stagger blocks to the
layer below. Use 7 full blocks and one half block to
build the top layer (see Figure 9). After laying out all
blocks, using a level, verify all the blocks are level.
Shim if necessary.
5. Place 4 heat shield retaining brackets (longer of
the 2 types of brackets included with the MFRB
Series burner system) on the top layer of blocks in
the pattern shown in Figure 10.
Figure 10 - Heat Shield Retaining Brackets
(MFR16-48 Shown)
Figure 9 - Top Layer (MFR16-48 Shown)