SEQUENCER
The sequencer of SYNTH PRO can store 240 patterns, each with a
length of up to 16 steps. The sequences can be entered
monophonic or polyphonic using an attached MIDI-keyboard.
Sequence – Selection and Storing
To select a sequence, press the
SEQUENCE
button. The lowermost
display-row will show the respective sequence 1 to 8 and the
respective bank 01 to 30. Use the
VALUE
encoder to select a bank.
Subsequently, use the
MISC
buttons 1 to 8 to call up a sequence in
that bank.
To store a sequence, first press the
STORE
button – the two LEDs
above are being lit red/green. Subsequently, press the
SEQUENCE
button (LED being lit red), select a bank using the
VALUE
control and
press a
MISC
button 1 to 8. The sequence is now stored and the LED
above
SEQUENCE
turns off.
Hint
: To avoid possible issues with hanging notes, do not run the
internal sequencer or arpeggiator while loading or saving. Also,
avoid sending MIDI-notes to the MIDI-input.
Sequence – Input and Playback
To program a sequence, press the
MISC
button
SEQ
(7) first and
activate the sequencer. The corresponding LED will be lit red.
To start programing, press the
RECORD
button. The corresponding
LED will be lit red.
Enter single notes or chords step by step using a MIDI-keyboard.
Chord notes need to be pressed simultaneously.
It is possible to insert a pause instead of a note by pressing
PLAY/REST
.
18
