MF DIGITAL DIRECTOR series, Руководство по быстрой настройке

Страница: 5 / 8

1. Locate the front of the mounting
plate as indicated by the yellow circle
to the right.
2. Slip the groove of the mounting
plate around the white plastic knob.
See picture above (yellow circle).
3. The threaded screw located at the
rear of the mounting plate will line up
with the “U”shaped housing located
on the rear of the Director Series
Unit. See picture above (blue circle).
4. After mounting the Printer, be sure
to push the printer all the way for-
ward then use the Thumbscrew to
secure the printer to the Director
Series Unit.
5. To wire your printer to the Director
Series Unit, please follow the wiring
diagram to the right.
Front
Rear
K
E
Y
Mounting & Connecting Your Prism Plus Printer
with the MF Digital Director Series.