MF DIGITAL DIRECTOR series, Руководство по быстрой настройке

Страница: 4 / 8

1. Locate the front of the mounting
plate as indicated by the yellow cir-
cle to the right.
2. Slip the groove of the mounting
plate around the white plastic
knob. See picture above (yellow
circle).
3. The threaded screw located at
the rear of the mounting plate will
line up with the “U”shaped housing
located on the rear of the Director
Series Unit. See picture above
(blue circle).
4. After mounting the Printer, be
sure to push the printer all the way
forward then use the Thumbscrew
to secure the printer to the Director
Series Unit.
5. To wire your printer to the
Director Series Unit, please follow
the wiring diagram to the right.
Front
Rear
K
E
Y
Mounting & Connecting Your PicoJet 6000
Printer with the MF Digital Director Series.