MF DIGITAL DIRECTOR PRO series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 79

background image

DIRECTOR Series Operator’s Guide

Document Revision: 06/15/05

Page 17

•

Click the Operator’s E-mail Address field and enter an email address.
Leave the field blank if the DIRECTOR is not attached to a network or
if you do not want to receive unit attention messages.

Recording Speed

The Recording Speed pull-down allows you to set the recording speed as
determined by the capabilities of the recorders installed in the DIRECTOR
EC.

•

Click the Recording Speed pull down and select the desired recording
speed “maximum speed”, or “4x, 8x, 12x, 16x, 20x, 24x, 32x, or 48x
speed”.

•

Click on “Apply” to activate the changes.

Asynchronous Mode (Required)

The Asynchronous Mode pull-down is used to instruct the DIRECTOR EC
how to process jobs. This affects both how jobs are handled and how the
drives operate. Jobs and drives can run either synchronously or
asynchronously. In the table below you will find each mode detailed. Let’s
define the basic modes first:

Jobs=Synchronous / Asynchronous

When  jobs  are  Synchronous,  they  are  completed  in  the  order  in  which
they were submitted. Take for example two jobs submitted for one copy
each.  The  first  job  is  of  a  650MB  master  while  the  second  job  is  only
10MB.  While  the  second  job  submitted  will  be  completed  prior  to  the
first  job,  it  will  not  be  outputted  to  the  accept  spindle  until  the  second
job  has  been  completed.  When  jobs  are  Asynchronous  they  will  be
outputted to the accept spindle as they are completed.

Drives=Synchronous /Asynchronous

Drives  can  also  run  either  synchronously  or  asynchronously.  In
synchronous mode, all the drives in use for a given job, run in tandem or
parallel to one another. In asynchronous mode, all the drives in use for a
given  job,  operate  independently  of  each  other.  For  example  if  you
submit a job for three copies and the drives are operating synchronously,
the copying process will not begin until all drives become ready. On the
other  hand,  if  the  same  job  were  submitted  with  the  drives  operating
asynchronously, each drive would begin to write as soon as it becomes
ready,  independently  of  any  other  drives  which  may  also  be  in  use  for

«
...
16
17
18
19
20
...
»

Содержание DIRECTOR PRO series
















































































Отзывы:

Нет отзывов

Похожие инструкции для DIRECTOR PRO series

Бренд: Vivotek Страницы: 136

ER3-100 (5K02-55)

Бренд: 8e6 Technologies Страницы: 74

DM/IP601-CPCI-100BT

Бренд: Dialogic Страницы: 2

BIC 1I12-P2A25-M30MI1-BPX05-110

Бренд: Balluff Страницы: 12

Бренд: Kontron Страницы: 19

Бренд: Quantum Страницы: 7

AT32F421 Series

Бренд: ARTERY Страницы: 337

Бренд: Hama Страницы: 25

Бренд: IBM Страницы: 130

Бренд: Laser Страницы: 4

Бренд: Xilinx Страницы: 27

Бренд: Aaeon Страницы: 119

Бренд: ExtraHop Страницы: 2

Бренд: Flexwatch Страницы: 13

Quark SoC X1000

Бренд: Galileo Страницы: 20

Бренд: Paradyne Страницы: 216

Бренд: Akasa Страницы: 2

Бренд: Jäger Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды