Mezger TH 210, Руководство по эксплуатации

Страница: 5 / 12

Pneumatic table stapler
TH 210
Page: 5
Change: 02/2019
ET 598
Page 5 of 12 21.02.19 P:\Technik\TH_THE_210\Bedienungsanleitung\Englisch\BA TH 210 02_2019_EN.docx
8
Fundamental notes on the work technique and handling
Before the operator starts to use the machine he must acquire information about the application
scenario and check if the stapling device is suitable for it.
Carefully observe all safety instructions!
Check to make sure that the stapling device is not damaged and that it can be
operated in a safe way.
The operating safety of the stapling device must be checked before starting the work and constantly
rechecked!
Safety devices may not be bypassed or rendered ineffective!
Keep your work area in order.
Disorder in the work area can cause accidents.

Use only ORIGINAL staples that are made specifically for this quality equipment. Third-party staples
can cause considerable damage and malfunctions.

Never perform a stapling without material to be stapled. Do not remove the stapling device until the
stapling process has been completed.

Do not staple on a hard underlay.

Should a staple failure arise, correct it immediately and do not trigger any further staple cycles.

Shut down the stapling device after use.
9
Decommissioning
If the stapling device is not used for a prolonged period of time, disconnect the air supply and extract
the staples.