33
32
ARMRESTS
The armrests can be adjusted in height
to suit the needs of the user.
!
Attention:
Do not use the armrests to lift or
carry the wheelchair.
•
Do not drive without the armrests!
Height adjustment
Slacken the clamping screw (fig. 38/
➀
), slide the end stop fully up and
lightly tighten the clamping screw
(fig. 38/
➀
).
!
Attention:
Before loosening the clamping
screws (fig. 38/
➀
) secure the arm-
rest against falling down with your
hand. – Danger of crushing!
•
During the adjustment the maxi-
mum armrest height is reached
when a mark becomes visible
above the receptacle tube.
•
Ensure the tight fit of the clamp-
ing screw (fig. 38/
➀
) in order to
prevent the armrest from sliding
down.
*WW = Wrench width (mm)
38
1
39
Height adjustment with height
stopper
(Option)
Slacken the clamping screw (fig. 31/
➀
and
➁
) slide the end stop fully up
and lightly tighten the clamping screw
(fig. 39/
➀
).
Push the height stopper down to the
stop and tighten the clamping screw
(fig. 39/
➁
).
ERGOpor-backrest element
(Option)
Detaching the ERGOpor back-
rest element
Loosen the attachment screws (fig. 35/
➀
) and push the clamping tins inward.
Then push the backrest element for-
wards out of the backrest frame (fig.
36).
Attaching the ERGOpor back-
rest element
Press the backrest element, left and
right, onto the backrest frame (fig. 36).
Push the securing screws (fig. 35/
➀
)
of the clamps outwards and then
tighten them.
ERGOpor backrest cushion
The ERGOpor backrest cushion (fig. 37/
➁
) is secured to the backrest shell with
Velcro fasteners and can be pulled off.
35
36
2
37
1
1
2
1
