manualshive.com logo in svg

Meyra iChair DYNAMIC 1.623, Руководство по эксплуатации

Поделиться
Скачать
Meyra iChair DYNAMIC 1.623 Скачать руководство пользователя страница 38

1

4

6

5

38   

Adjusting the shoulder strap to 
the body

 

☞

The strap should not be pulled too 
tight.

To adjust the strap length, open the respec-
tive buckle (4) resp. (5). Readjust the strap 
and close the respective buckle again.

 

☞

Protruding ends of the strap can be 
fastened with the buckle (6) near the 
pelvis.

LIGHTING

For driving outdoors and on public roads 
the electric wheelchair can be fit with 
LED-lighting equipment (1).
The lighting is activated through the driving 
module.

 

☞

Therefore observe chapter 

Keys and 

symbols - driving module

 on page 21.

 

☞

Always switch on the lighting system in 
poor visibility conditions and especially 
during darkness in order to see better 
and be better seen by others.

 

☞

Ensure that headlights, turn signals and 
taillights as well as reflectors are not 
covered by clothes or other objects at-
tached to the electric wheelchair.

Содержание iChair DYNAMIC 1.623

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды