Meyra iChair DYNAMIC 1.623 Скачать руководство пользователя страница 29

Страница: 29 / 64

BACK SUPPORT

Only adjust the back support when the
electric wheelchair is standing on a level
surface. A danger of tipping over exists on
gradients!

The back support (1) is returned to the initial
position by the pneumatic spring after each
unintended adjustment.

Locking the back support

The inclination of the back support (1) is
lockable [2].

☞

Observe the jamming area between
the upholstered handgrip and release
lever (3)!

For adjustment of the back support, first
pull the release lever (3), then activate the
tilting lever (4) and slowly let the release le-
ver swivel back into place. In doing so let the
tilting lever engage into the lowest locking
position [5].

☞

The back support is locked into place.

Releasing the back support

To release the back support (1) tighten the
release lever (6) handtight, until the tilting
lever visibly and audibly locks into place [7].

☞

Afterwards let go of the release lever (6)
and check the function of the released
back support.

Содержание iChair DYNAMIC 1.623

































































Результаты поиска

Содержание iChair DYNAMIC 1.623

Отзывы:

Похожие инструкции для iChair DYNAMIC 1.623

Бренды по названию

Популярные бренды

Meyra iChair DYNAMIC 1.623, Руководство по эксплуатации

Результаты поиска

Содержание iChair DYNAMIC 1.623

Отзывы:

Похожие инструкции для iChair DYNAMIC 1.623

Бренды по названию

Популярные бренды