12
Continuous legrests
Code 54
(Fig.18+19)
The continuous legrests can be folded up
to the side.
The adjustment of height and angle is
effected via the adjusting screws (A, Fig.
18).
Depth adjustment is effected via the ad-
justing screws (B, Fig. 18).
Legrests for amputees
Code 52
(Fig.58+59)
Functions and procedure identical to
standard legrests.
– Loosen the locking screw to adjust the
height (B).
– After disassembly of the screws ( C )
the legrest pad can be assembled in
another position.
– Loosen the clamp lever (D) to adjust
the angle.
Angle adjustable foot plates
Code 808
(Fig.10)
Handling:
Tools
Hexagonal stud wrench WW* 5
– Move the brake release lever to the
"drive" position. This will prevent the
wheelchair from inadvertently rolling
away.
– Loosen screw connection (A) at the
pivot of the footrest
– Adjust the foot plate to the required
angle. – To do so, separate the teeth
of the angle adjustment mechanism.
– Tighten screw connection (A)
ARMRESTS
The armrests (3) generally have padded
armrests. They are lockable and de-
tachable, as well as adjustable in
height, (Fig. 21).
Benefits:
– Adjusting screws prevent the side
parts from inadvertently sliding out
– Mudguard
– Wind protection.
– Lateral support for body
– Relaxation of the shoulder muscles
due to padded height adjustable
armrests.
Note!
The side parts are movable and de-
tachable and are not suitable for lif-
ting or carrying the wheelchair (see
warning sign on side parts)!
Removing the armrests
– Switch off the wheelchair and move
the brake release lever to the "drive"
position. – This prevents the
wheelchair from rolling away acci-
dentally.
– Lift out the side part.
– This is
carried out by loosening the relevant
adjusting screw (A, Fig. 21) on the
clamping guide.
Note!
Removed side parts must be carefully
replaced before the wheelchair is
used again!
Never use the wheelchair unless the
side parts are mounted.
Adjustment of seat width
– Switch off the wheelchair and move
the brake release lever to the "drive"
position. – This prevents the
wheelchair from rolling away acci-
dentally.
– Push the side part outwards/in-
wards. – This is carried out by loose-
ning the relevant adjusting screw (A,
Fig. 23) on the clamping guide.
Only push the side part outwards as
far as the guide mark!
Note!
Check that the brake release lever is
functioning.
– Tighten adjusting screw (A, Fig. 23)
again. – Ensure that it is secured.
Adjustment of seat width via the
armrest
By removing the screws (A, fig. 24), it is
possible to adjust seat width by moving
the armrest. After that each side pad
Code 959 has to be fixed.
Side pad Code 959
The side pad is fixed on the armrest by
Velcro strips (Fig. 5).
Height adjustment of the armrests
The padded armrests on the side parts
are progressively adjustable in height.
LEGRESTS
Содержание 2.432
