Meyra 2.360, Руководство по техническому обслуживанию и ремонту

Страница: 24 / 40

24
SUPPORT CASTORS
Assembly position of the support castor
The support castor is slid from the bottom into the rear
frame tube and mounted there [1].
Correct support castors length
The support castors must reach further out than the drive
wheels in order to achieve a sufficient support function.
Height adjustment
The support tube is height adjustable by 35 mm in 2 posi-
tions (2)+(3).
For height adjustment of the support castor, the respective
attachment screw (2) needs to be removed.
Angle adjustment
The support wheels are angle adjustable in three positions
in case a height adjustment does not achieve the ideal po-
sition of the support wheels.
1. Slightly loosen the screw (4).
2. Remove the screw (5) and swivel the support castor to
the desired position. Afterwards remount the screwed
connection (5).
3. Retighten the screws (4).
!
Attention:
After each adjustment to the angle of the support
wheels the screwed connection is to be checked for
secure hold!
2
3
1
4 5