Meyra 2.360, Руководство по техническому обслуживанию и ремонту

Страница: 11 / 40

11
Depth adjustment of the footboard
(only with model 2.360)
Depth adjustment of the footboard is carried out by repo-
sitioning the removable distancers (3) or by turning around
the asymmetrical footboard (6).
Repositioning the removable distancers
– Lift the footboard slightly on the side that can be folded
open.
– Reposition the desired amount of distancer pieces on
the side that can be folded open [4]).
– Pull/press the distancers that are to be repositioned on
the firm side of the footboard outward from the retain-
ing rod (5).
☞
Note:
In certain angle settings of the footboard it is possible
that a removal or placing of certain distancer pieces is
not possible. Then fold up the footboard.
– Reposition the footboard and insert the distancer piec-
es back again as far as possible to the retaining rod.
– Swivel the footboard down and hook it into place.
Turning around the footplate
– Remove the footboard screws (7).
– Turn the footboard horizontally by 180°.
– Mount the footboard screws (7).
Changing the seat width
In order to change the seat width, the following assembly
groups are to be replaced:
1. The back support
2. The footboard
3. The seat belt
4. The crossbrace
5. The horizontal push bar
5
4
3
3
6
7