Meyra 1.595-603, Руководство по эксплуатации

Страница: 15 / 52

2
11
15
Pre-operation checks
Before starting to drive, the following should
be checked:
☞
the battery charging condition,
☞
the setting of the preselected final
speed.
– For this observe the operating manual
<
Operating module
>.
Battery charging procedure
☞
For the battery charging procedure also
observe the operating manual of the
battery charger.
1. Lock the electric wheelchair.
☞
Therefore observe chapter Securing
the electric wheelchair on page 10.
2. Insert the charger plug into the battery
charging socket (1) of the operating
module.
!
Attention:
Do not insert any objects other than
the battery charger plug into the bat-
tery charging socket.
– Danger of short circuit!
3. Switch the battery charger on, resp.
insert the main plug of the battery
charger into the corresponding power
socket.
☞
The charging procedure is initiated.
☞
The charging procedure only runs
with an intact mains/battery fuse
(2)!
4. After a completed charging procedure
disconnect the battery charger from
the socket and remove the battery
charging plug from the battery charg-
ing socket.