Meyra 1.254, Руководство по эксплуатации

Страница: 20 / 52

1
2
4
3
20
SELECTING THE
OPERATION
In order to obtain operational readiness of
the Scooter the following directions are to
be carried out in the indicated order.
1. Charge the drive batteries via the op-
erating module before the first journey
(1).
☞
Therefore observe chapter Recharging
batteries on page 21.
2. Switch the drive motors to the drive
mode [2]. – For this engage the brakes.
☞
Observe chapter Locking the brakes
on page 13.
3. Check the position of he steering col-
umn.
In order to position the steering col-
umn, press the adjustment lever (3) up-
ward.
☞
The steering column is to be posi-
tioned so that the scooter can be
steered comfortably and safely.
4. Switching on the Scooter
☞
Do not insert objects, other than the
driving key, resp. the battery charging
plug into the corresponding sockets.
– Danger of short circuit!
To switch the scooter on turn the driv-
ing key 90° clockwise (4).
☞
The scooter is ready when the sta-
tus gauge is permanently lit.