Meyra 1.254, Руководство по эксплуатации

Страница: 14 / 52

2
1
14
DRIVE-/PUSH MODE
Only switch the Scooter to push mode
when it is standing still for positioning
or in case of emergencies, but not on
slopes/hills.
After push mode do not forget to switch
the drive back to drive mode. Danger of
uncontrolled Scooter movement if you do
not do this!
Selecting the push mode
1. Switch off the operating module be-
cause the pushing will otherwise be
made difficult by the electric system.
☞
Therefore observe chapter Operat-
ing module-functions on page 16.
2. Disengage the brakes [1].
☞
Therefore observe chapter
Releasing
the brakes
on page 13.
☞
The Scooter can now be pushed.
Selecting the motor mode
1. Activate the brakes [2].
☞
Therefore observe chapter Locking
the brakes on page 13.
2. Switch the operating module on.
☞
Therefore observe chapter Operat-
ing module-functions on page 16.
☞
The Scooter is now ready for use
again.