Meyra 1.155 NANO, Руководство по эксплуатации

Страница: 32 / 44

32
Tyre pressure of pneumatic tyres
Maximum tyre pressure is printed on the
tyres on each side.
Full tyre pressure – steering wheel
Standard:
2.5 - 3.5 bar = 36 - 50 psi
Full tyre pressure – drive wheel
Standard:
3.0 - 4.0 bar = 44 - 58 psi
Ultra-light running tyres:
6 bar = 87 psi
High pressure:
8 bar = 116 psi
Applied norms
The wheelchair complies with the norm:
– EN 12183: 2014
– ISO 7176-8: 2014
– ISO 7176 -19: 2008
☞
Assessment of the Crashtest, in
which the wheelchair is attached to
the retaining system of the vehicle,
has been carried out according to
the testing methods of annex D.
The applied parts and components we use
are in compliance to EN 1021-2 for resistance
against inflammation.
TECHNICAL DATA
All data given in the < Technical data > refers
to the standard version.
The overall length depends on the position
and size of the drive wheels.
If not noted otherwise the dimensions are
determined with drive wheels of ø 610 mm
(24“).
The widths were determined with a han-
drim distance of 15 mm.
Dimensional tolerance ±15 mm, ± 2°.
Short form of wheelchair dimensions:
SH = Seat height
SW = Seat width
SD = Seat depth
BH = Back support height
Calculation of the max. user weight:
The maximum total load is calculated on
the basis of the unloaded weight of the
wheelchair and the maximum passenger
weight.
Additional weight due to subsequent addi-
tions or luggage reduce the maximum per-
missible passenger weight.
Example:
A driver wishes to take luggage with a
weight of 5 kg. Thus, the maximum user
weight is reduced by 5 kg.