1
2
18
Removing.the.leg.supports
For easy transfer into and out of the
wheelchair as well as a reduced wheel-
chair length (important for transport)
the leg supports can be removed [1].
☞
.Note:
Before removing the leg supports
loosen or remove the calf belt on
one side.
☞
View chapter Calf belt on page 14.
First swivel the leg support sideways
[2] and then remove them toward the
top.
☞
Therefore observe chapter Turn-
ing the leg supports to the side on
page 17.
Attaching.the.leg.supports
With the leg support in a swivelled-
aside position, hang it in and then
swivel it to the front until the locking
device audibly latches.
☞
.Note:
After attachment swivel the leg
supports inward.
☞
Therefore observe chapter Swivel-
ling in the leg supports on page 17.
Press the leg supports, swivelled to the
side, parallel to the front frame tube
and lower it into place [2]. – In doing
so the holding pin must slide into the
frame tube.
