Meyer STELLA-188, Руководство по эксплуатации

Страница: 22 / 28

APPENDIX A: STELLA SPECIFICATIONS
22
STELLA-4C SPECIFICATIONS
Operating Frequency Range 100 Hz – 18 kHz
Note: Recommended maximum operating frequency range. Response depends on loading conditions and
room acoustics.
Frequency Response 115 Hz – 16 kHz ±4 dB
Note: Measured free-field with pink noise at 1 meter, 1/3rd octave resolution.
Maximum Peak SPL 108 dB
Note: Measured free-field with music and referred to 1 meter.
Phase Response 250 Hz – 18 kHz ±30°
Coverage 60° (3 kHz – 13 kHz ±10°); 120° (below 2 kHz)
Transducer One 4” cone driver
Voltage Requirement 12–18 V DC
Audio/Power Connector Single 5-pin Phoenix (3 pins for balanced audio, 2 pins for DC power)
Input Impedance 20 k

balanced internal isolation (Iso-Input) transformer
Nominal Input Sensitivity +6 dBV (2.0 V rms, 2.8 V peak) continuous average is typically the onset of limiting for noise and music
Input Level Audio source must be capable of deli15 dBV (5.6 V rms, 8.0 V peak) into 600

to produce the
maximum peak SPL over the loudspeaker’s operating bandwidth
Current Draw 1.5 A average; 3.3 A peak
Noise Floor < 20 dB A weighted
Dimensions 11.75” (front OD) x 4.00” (depth without grille)
298.42 mm (front OD) x 101.60 mm (depth without grille)
Weight 6.0 lbs (2.72 kg) without backbox
Stella-4C Dimensions
Ø13.23
[Ø336.02mm]
7.95
[202.06mm]
11.25
[285.75mm]
Ø0.22
[Ø5.50mm]
1.40
[35.56mm]
6.33
[160.78mm]
5.12
[129.94mm]
11.75
[298.42mm]
4.00
[101.60mm]
Stella-4C with Typical Third-Party Backcan Dimensions
10.00
[254.00mm]
6.53
[165.92mm]
1.35
[34.42mm]
7.89
[200.33mm]