Meyer RL30-30, Руководство владельца/оператора

Страница: 12 / 48

Meyer Manufacturing Corporation - 12 - PB-RL30-21
5.1 SAFETY PRECAUTIONS
• DO NOT allow anyone to operate, service, inspect or otherwise handle this reloader until all operators have read and
understood all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its
intended usage.
• For an operator to be qualified, he or she must not use drugs or alcohol which impair alertness or coordination while
working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely
operate a machine and the equipment.
• Make sure all personnel can READ and UNDERSTAND all safety signs.
• DO NOT allow minors (children) or inexperienced persons to operate this reloader.
• DO NOT operate until all shields and guards are in place and securely fastened.
• DO NOT step up on any part of the reloader at any time.
• DO NOT adjust, clean or lubricate while the reloader is in motion.
• Inspect when first delivered and regularly thereafter; that all connections and bolts are tight and secure before
operating.
• Know how to stop operation of the reloader before starting it!
• Make certain everyone is clear of the reloader before applying power.
• Keep hands, feet and clothing away from moving parts. Loose or floppy clothing should not be worn by the operator.
• Observe all applicable traffic laws when transporting on public roadways (where legal to do so). Check local laws for
all highway lighting and marking requirements.
• Shut off and lock out power before adjusting, servicing, maintaining or clearing an obstruction from this machine. (See
5.3 SHUTOFF & LOCKOUT POWER on page 20.)
• Always enter curves or drive up or down hills at a low speed and at a gradual steering angle.
• Never allow riders on either tractor / truck or equipment.
• Keep tractor / truck in a lower gear at all times when traveling down steep grades.
• Stay away from overhead power lines. Electrocution can occur without direct contact.
• Use only properly rated undercarriage and tires.
• Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.
• Always install a SMV emblem on pull-type equipment when transporting on roadways and keep clean and bright.
• Always yield to oncoming traffic in all situations and move to the side of the road so any following traffic may pass.
All individuals who will operate this reloader must read and
completely understand this Operator’s And Parts Manual.
Operator must receive instructions before operating the
machine. Untrained operators can cause injury or death.