Meyer Blaster 750, Инструкция по установке и руководство пользователя

Страница: 5 / 8

SWING WAY HITCH MOUNT (35160)
Item Part No. Qty. Description
35160 Swing Away Hitch Mount
08670 1 • Pin w/Lynch Pin Kit
1 11101 2 •• Hinge Pin
2 22083 2 •• Lynch pin
34608 1 • Hardware Bag 350/750
3 22732 8 •• Locknut 1/2-13 SS
4 22733 16 •• Flawasher 1/2” SS
5 22736 8 •• Bolt 1/2-13 x 3” SS
6 35140 1 • Swing Away Assembly
7 20005 4 •• Bolt H 1/4-20 x 1” Gr. 5
8 20303 4 •• Locknut 1/4-20
9 22083 2 •• Lynch pin
10 22438 1 •• Pin 1 x 2-1/2
11 22957 3 •• Shim
12 22375 1 •• 1 x 8-3/4” Pivot Pin
13 35130 1 •• Swing Away Hitch Pivot
14 35135 1 •• Swing Away Hitch
15 38295 1 •• Swing Away Pull Clamp
Parts List
Parts indented are included in the assembly under which they are indented.
This section covers the installation of an BLASTER 350 & 750 as a Swing Away mount.
CAUTION – because of its bulk and weight, this salt spreader should be installed with an assistant. As with any new equipment installation,
please read and understand all instructions prior to starting the job, and do not hurry through it. A correct installation now can save time and
money later.
1.) With the help of an assistant, slide the 35140 Swing Away Assembly into the 2” rear hitch receiver and pin to receiver hitch using
Hinge Pin (1) and Lynch Pin (2).
2.) Attach Spreader to 35140 Swing Away Assembly using 1/2-13 x 3” Bolt (5), 1/2” Flatwashers (4) and 1/2-13 Locknut (3).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3
3
3
4
4
4
4
4
4
4
5
5
5
9
15
15