Meyer 1400 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 7 / 18

7
3-1 RECEIVING YOUR MACHINE
Immediately check the condition of your new machine as received. The unit was shipped in perfect
condition and should arrive the same way. Ownership of the goods was transferred to the carrier
as soon as it left our dock. Your order may have shipped on multiple skids, verify your count equals
that of the Bill Of Lading. If there are any missing items or visible problems, mark them on the Bill Of
Lading that the carrier has and call their office immediately before the driver leaves your premises.
Meyer cannot file a claim on your behalf; however, please let us know by phone and writing about any
problems so that we can assist you with immediate replacement parts or information.
3-2 UNCRATING YOUR MACHINE
1. Carefully remove all shipping materials from the machine.
2. Check that all parts are included as stated on the Packing List that came with your shipment.
3. If anything is missing for any reason, please contact Wm. W. Meyer & Sons immediately.
4. If the equipment or goods are discovered to be damaged in a shipment at a later date, contact the
carrier and Wm. W. Meyer & Sons immediately.
SECTION II
APPLICATION - INTENDED USE OF EQUIPMENT
The MEYER SERIES 1400 INSULATION BLOWING MACHINE is designed to process and blow all of the
currently available loose fill fiberglass and cellulose insulations on the market today.
This equipment must be used only for the purpose for which it was intended. Any
other use could cause bodily injury to the operator, costly damage to the equipment
and void the warranty.
SECTION IV
SPECIFICATIONS
EQUIPMENT SPECIFICATIONS TEMPERATURE AND HUMIDITY LIMITS
WIDTH: 86” (218cm) Operating Temperature: -25°C to +25°C
DEPTH: 49” (125cm) Transportation Temperature: 0°C to 40°C
HEIGHT: 72” (183cm) Humidity Limits: Rated up to 95%
WEIGHT: APPROX. 1,950 LBS. (884 kgs.)
NOISE LEVEL: 85 dBA @ 1 Meter
SECTION III
RECEIVING AND UNCRATING