Meyer Sound UP-4XP, Руководство по эксплуатации

Страница: 7 / 40

7
CHAPTER 1: INTRODUCTION
HOW TO USE THIS MANUAL
Make sure to read these operating instructions in their
entirety before configuring a loudspeaker system with
UP-4XPs. In particular, pay close attention to material
related to safety issues.
As you read these operating instructions, you will encounter
the following icons for notes, tips, and cautions:
NOTE: A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP: A tip offers a helpful tip relevant to the topic
at hand.
CAUTION: A caution gives notice that an
action may have serious consequences and
could cause harm to equipment or personnel, or
could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available at
www.meyersound.com .
Meyer Sound Technical Support is available at:
■
Tel: +1 510 486.1166
■
Tel: +1 510 486.0657 (after hours support)
■
Web: www.meyersound.com/support
■
Email: techsupport@meyersound.com
UP-4XP ULTRACOMPACT LOUDSPEAKER
The UP-4XP ultracompact loudspeaker is ideally suited for
applications requiring a small, inconspicuous cabinet that
also delivers high sound pressure levels, low distortion, and
uniform directional control. The self-powered UP-4XP offers
exceptional audio performance in a compact package with
the advantages of a remote power supply. As a standalone
loudspeaker, the UP-4XP can be used for vocal reinforce-
ment, frontfill coverage, and delay coverage for under-bal-
cony applications. The UP-4XP can also be paired with an
optional subwoofer to create a full-range system.
The UP-4XP boasts a wide operating frequency range of
66 Hz to 18 kHz and a maximum peak SPL of 121 dB, with
very low distortion. The unit's high-frequency section
includes a 1-inch metal dome tweeter on a constant-direc-
tivity, high-frequency horn with a 100-degree beamwidth.
The low/mid-frequency section includes two 4-inch cone
transducers that work in parallel at low frequencies — deliv-
ering a combined acoustic output — with one of the drivers
rolling off at higher frequencies to prevent interference (due
to comb filtering effects) in the crossover region. The propri-
etary UP-4XP drivers, which are manufactured at Meyer
Sound's factory in Berkeley, California, are powered by three
channels of onboard power amplification that include an
active crossover, driver protection, and frequency and phase
correction circuitry.
!
UP-4XP UltraCompact Loudspeaker