Meyer Sound Stella-188, Руководство по эксплуатации

Страница: 14 / 32

CHAPTER 2: CONNECTING STELLA LOUDSPEAKERS
14
Safety Issues
Pay close attention to these important electrical and safety
issues.
■ The Stella-188 requires a grounded outlet.
■ Do not use a ground-lifting adapter or cut the AC cable
ground pin.
■ Keep all liquids away from the Stella-188 to avoid haz-
ards from electrical shock.
■ Do not operate the unit if the power cables are frayed or
broken.
Audio Input
Up to eight channels of balanced audio are received via the
Stella-188’s Audio Input connector. Each of the eight audio
channels is hard-wired to the corresponding Stella-188
Channel Outputs, thereby allowing for easy distribution of
discrete audio channels for Constellation installations.
The Audio Input connector requires either a 25-pin D-sub to
8-channel audio snake, or 25-pin D-sub to D-sub cable for
connecting directly to audio processors.
Meyer Sound manufacturers the following cables that can
be used with the Stella-188 Audio Input connector (for more
information, contact Meyer Sound).
■
D-sub male to D-sub male cable, 0.5 meters
(PN 28.167.012.01)
■
D-sub male to D-sub male cable, 1 meter
(PN 28.167.012.02)
■
D-sub male to D-sub male cable, 2 meters
(PN 28.167.012.03)
■
D-sub male to XLR female cable, 10 feet
(PN 28.139.009.01)
You can also make your own audio cables for connecting to
the Stella-188. The Audio Input connector uses the following
Tascam DA-88 wiring scheme.
Earth ground
Chassis ground
Stella-188 Audio Input
Table 2: Pin Outputs for Stella-188 Audio Input Connector
Channel
Number
XLR Pin 1
(Chassis)
XLR Pin 2
(Hot)
XLR Pin 3
(Cold)
1 D-sub 25 D-sub 24 D-sub 12
2 D-sub 11 D-sub 10 D-sub 23
3 D-sub 22 D-sub 21 D-sub 9
4 D-sub 8 D-sub 7 D-sub 20
5 D-sub 19 D-sub 18 D-sub 6
6 D-sub 5 D-sub 4 D-sub 17
7 D-sub 16 D-sub 15 D-sub 3
8 D-sub 2 D-sub 1 D-sub 14