Meyer Sound Amie-Sub, Руководство по эксплуатации

Страница: 9 / 32

9
CHAPTER 1: INTRODUCTION
HOW TO USE THIS MANUAL
Make sure to read these instructions in their entirety before
configuring a Meyer Sound loudspeaker system. In
particular, pay close attention to material related to safety
issues.
As you read these instructions, you will encounter the
following icons for notes, tips, and cautions:
NOTE: A note identifies an important or useful
piece of information relating to the topic under
discussion.
TIP: A tip offers a helpful tip relevant to the
topic at hand.
CAUTION: A caution gives notice that an
action may have serious consequences and
could cause harm to equipment or personnel,
or could cause delays or other problems.
Information and specifications are subject to change.
Updates and supplementary information are available at
www.meyersound.com .
Meyer Sound Technical Support is available at:

Tel: +1 510 486.1166

Tel: +1 510 486.0657 (after hours support)

Web: www.meyersound.com/support
THE AMIE-SUB LOUDSPEAKER
The Amie-Sub was specifically designed to be the perfect
companion for Amie precision monitors—creating a
complete system by extending the system frequency
response down to 22 Hz with easy integration in
multichannel configurations.
In addition, due its performance and versatility, the
Amie
- Sub is equally suited to complement other Meyer
Sound loudspeakers, such as HMS-5, HMS-10, HMS-12,
and HMS-15 (in immersive surround applications) or
UltraSeries loudspeakers (for more general applications).
Extensive research and measurements resulted in the
creation of Amie-Sub integration modules to produce
consistent behavior across multiple configurations and
environments. These optional integration modules enable
the Amie-Sub to excel at working in any multichannel
configuration, creating a perfectly balanced and easy-to-
set-up system with up to seven Amie precision monitors.
The Amie-Sub has an operating frequency range of
22–160 Hz and a linear peak SPL of 124.5 dB with crest
factor >11.5 dB (measured in half-space at 4 m and referred
to 1 m using M-noise).
The Amie-Sub includes a single 15-inch, low distortion, long
excursion cone driver. The bass reflex cabinet employs
optimized port design for high efficiency and low port
distortion. Its slanted connector panel (Figure 1) facilitates
flush
- mounting the cabinet against wall surfaces, reducing
required installation depth to 19 inches including
connectors.
!
Figure 1: Amie-Sub Slanted Connector Panel