Meyer Sound 40.010.971.01, Инструкция по сборке

Страница: 67 / 96

MG-MINA/LINA/750-LFC GRID ASSEMBLY GUIDE
59
MUB-MINA/LINA LOAD RATINGS
An array of up to five LINA loudspeakers can be flown with the MUB-MINA/LINA U-bracket at a 5:1 safety factor. When fly-
ing any number of LINAs with the U-bracket, the U-bracket must be secured to the mounting surface with either the two
1/2-inch center holes or the four 1/4-inch corner holes.
CAUTION:
When mounting the MUB-MINA/LINA on a pole, make sure the pole and pole-mount adapter have
been rated to support the full weight of the U-bracket and loudspeakers. Observe all safety precautions speci-
fied by the pole and pole-mount adapter manufacturer.
MUB-MINA/LINA ANGLE SETTINGS
To allow for a range of angles for the attached LINA, one end of the MUB-MINA/LINA U-bracket has three fixed holes and
the other end has a single fixed hole and a slot. The U-bracket’s holes and slots align with LINA’s attachment points (two
per side). The screws and washers included with the MUB-MINA/LINA kit secure the U-bracket to the LINA cabinet.
Tables 12–15 on the following pages show the available angles for both flown and floor- and pole-mount configurations of
the MUB-MINA/LINA.
•
When using the MUB-MINA/LINA U-bracket for flown configurations, the U-bracket can be oriented for either maximum
downtilt (with the slot near the front of the loudspeakers) or maximum uptilt (with the slot near the rear of the loudspeak-
ers).
•
When using the MUB-MINA/LINA U-bracket for floor- and pole-mounted configurations, the U-bracket can be oriented
for either maximum downtilt (with the slot near the rear of the loudspeakers) or maximum uptilt (with the slot near the
front of the loudspeakers).
Table 11: MUB-MINA/LINA Load Ratings
Mounting Point Safety
Factor
Number of Flown LINAs MUB-MINA/LINA Mounting Points
Two 0.5 in
center holes 5:1 Two LINAs (86.8 lbs, 39.2 kg) with
the load evenly distributed on the
two points
Four 0.25 in
corner holes 5:1 Five LINAs (217 lbs, 98 kg) with
the load evenly distributed on the
four points
Two 0.25 in
center holes NA
Not rated for flown applications
;
these holes should only be used
to attach the U-bracket to a pole-
mount adapter.
Not rated for flown applications
!