manualshive.com logo in svg

Meyer Sound 40.010.971.01, Инструкция по сборке

Поделиться
Скачать
Meyer Sound 40.010.971.01 Скачать руководство пользователя страница 35

27

CHAPTER 6: FLYING ARRAYS

MG-MINA/LINA/750-LFC GRID ORIENTATIONS FOR FLOWN CONFIGURATIONS

The orientation of the MG-MINA/LINA/750-LFC grid allows placement of the array’s center of gravity closer to the front or 
rear of the grid, thereby determining the maximum downtilt or uptilt available for the flown array.

MG-MINA/LINA/750-LFC Oriented for Maximum Array Downtilt

When the MG-MINA/LINA/750-LFC grid is oriented so the loudspeaker mounts closer to the front of the grid, the array’s 
center of gravity moves closer to the front of the grid. The grid's rear pickup points can then be used to achieve maximum 
array downtilt. The label on the MG-MINA/LINA/750-LFC shows this configuration as “Maximum Downtilt.” Using the maxi-
mum downtilt orientation, the LINA at the top of the array can be attached relative to the grid at 0 and –5 degree (downtilt).

Figure 18: LINA Closer to Front of MG-MINA/LINA/750-LFC for Maximum Array Downtilt

Figure 19: LINA Closer to Rear of MG-MINA/LINA/750-LFC for Maximum Array Uptilt

Содержание 40.010.971.01

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды