manualshive.com logo in svg

Meya CLOU 9.500, Руководство по эксплуатации, Страница: 59 / 80

Поделиться
Скачать
Meya CLOU 9.500 Скачать руководство пользователя страница 59

2

59

Disassembly of the steering 
wheels

The steering wheel is to be disassem-
bled before replacement or repair.
For this disassemble the wheel axle 
(2).

!

 Attention:

 

Never loosen the rim half connec-
tion screws in order to disassemble 
the tyre before previously com-
pletely defl ating the tyre!

 

– Danger of injury!

☞

  

Note:

 

Take note of the arrangement of 
all sleeves and washers used.

Assembly of the steering wheels

After inserting the steering wheel the 
wheel axle (2) is to be reassembled.

☞

  

Note:

 

The torque in Nm can be found in 
the < 

Technical data

 >.

Changing the tyres

The tyre is to be levered off of the rim 
with suitable tooling (assembly lever).

!

 Attention:

 Fully 

de-infl ate the tyres for a tyre 

change.

☞

  

Note:

  The air pressure for the tyres is 

shown on both sides of the tyre 
and in the < 

Technical data

 > sec-

tion.

Содержание CLOU 9.500

















































































Отзывы:

Нет отзывов