MEWOI MEWOI1500D, Руководство пользователя

Страница: 13 / 32

-9-
1. HV detector clamp (including the boot sectors)
2. HV detector booting indicator
3. POWER key on HV detector
4. Connector of insulating rods
(φ24mm)
5. RS232 interface, for data upload to computer
6. POWER key on principal machine
7. MEM key and arrows keys
8. LV current clamp CT1 Interface
9. LV current clamp CT2 Interface
10. LV current clamp CT3 Interface
11. Principal machine LCD displayer
12. LV current clamp output plug
13. LV current clamp clips (3 pieces)
14. LV current clamp leads
15. Insulating rods (5 pieces)
V Operations
Check if any damage exists for each part
before operating the tester; it can be put into
use only after being qualified.
Install
the battery according to the
requirements set forth in the manual.
1. Power-on/off of HV detector
Press the POWER key to power on the HV detector, and the
POWER indicator lights, the HV detector begins to detect
automatically, and transmits the tested data to the principal
machine by wireless network. The HV detector can power-off
automatically when the POWER indicator flashes continually after
about 15 minutes as of booting, and the detector can shut down
automatically to save the battery power, after the POWER indicator
flashes for 30 seconds. When the POWER indicator flashes