© Meunier Technologies Inc. 2022 - All rights reserved
5
Unpacking and Storage
Unpacking
When unpacking the product, ensure that it is defect-free and according to the purchase
order. Please notify Meunier Technologies Inc. or your supplier if there are any
irregularities.
Avoid any changes to the back pressure valve and pressure relief valve as they may be
factory set. Factory set valves are labelled with the desired pressure at each valve.
The box should contain one (1) DICE
TM
dosing module, one (1) IOM (Installation,
Operation and Maintenance) manual and the purchased spare parts.
Storage and Handling
The DICE
TM
dosing module must be stored indoors, inside its cardboard box, at a
temperature of between 5 °C to 40 °C and with a relative humidity level under
80%.
The DICE
TM
dosing module must be stored without any pre-set pressure on the
back pressure valve and pressure relief valve.
Excessive stacking of packages may cause damage to the product. Never stack
more than five (5) DICE
TM
dosing modules.
Do not store the DICE
TM
dosing module in a corrosive environment or directly
exposed to sunlight.
Handle the DICE
TM
dosing module with care. Never throw the dosing module,
even when it is in its cardboard box. The product is not designed to sustain
impact.
