Metz mecablitz 64 AF-1 digital, Руководство по эксплуатации

Страница: 818 / 1614

7 Flash modes
Depending on the camera model, the follo-
wing flash modes are available:
• TTL flash mode (
), chap. 7.1
• Automatic high-speed synchronisation (FP),
chap. 7.4
• Automatic flash mode ( ), chap. 7.5
• Manual flash mode ( ), chap. 7.3
• Strobe flash mode ( ), chap. 7.6
• flash mode
(adjustable only on camera)
• flash mode, chap. 10.2
• flash mode, chap. 10.4
The flash mode is set using the touch
display.
A data transfer between flash unit and came-
ra is necessary before setting flash modes
and e.g. by actuating the shutter
release.
7.1 TTL flash mode ( )
These flash modes offer a very simple
method of obtaining very good flash shots.
Here, the exposure is measured by a sensor
in the camera. It measures the light reflected
by the subject through the lens (TTL =
"Through The Lens").
If the shot was exposed correctly, the correct
exposure indication will illuminate for about
3 seconds (see 4.2).
TTL
A
M
STROBO
REMOTE MASTER
REMOTE SLAVE
SERVO
M FP TTL FP
TTL
When taking a shot, an almost imperceptible
measurement pre-flash is triggered by the
camera prior to the actual exposure process.
Setting the mode of operation
• Switch on the flash unit with the
햳
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last
(e.g. M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press on the selected mode of operation
that is highlighted in yellow. The setting is
adopted immediately.
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
TTL
158
V 1.0
MB 64AF-1
digital
OLY
9.0 m
F
5,6
M-
Zoom
35
m
m
M
i
P
1/1
MODE
q
p
TTL
A
k