Metz mecablitz 52 AF-1, Руководство по эксплуатации

Страница: 172 / 298

172
k
10.2.1 Remote slave flash mode settings
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last (e.g.
M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select "SLAVE".
• Press the sensor button on the
touch display. Remote slave mode is set.
In addition, the selected slave group (e.g. A)
and the remote channel (e.g. CH 1) are dis-
played.
SLAVE
10.2.2 Setting the slave channel
• Press the sensor button on the touch
display for the channel group (e.g.
). The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
A I CH1
MASTER
SLAVE
SERVO
MASTER
SLAVE
SERVO
REMOTE
SLAVE
INFO
EV
Z
OOM
35 mm
A
CH
1
REMOTE
SLAVE
INFO
EV
Z
OOM
35 mm
A
CH
1
E TTL
INFO
EV
+
1
1/3
0,3
-3,5 m
Z
OOM
35 F4.0
m
m
1
3
1
CH
A
GROUP