manualshive.com logo in svg

Metz Axio 32 FHD CT, Руководство по эксплуатации

Поделиться
Скачать
Metz Axio 32 FHD CT Скачать руководство пользователя страница 51

51

14. Childlock

b) Permitted programmes:

Activate the childlock as described in step a).
Use the corresponding numeric key to select the menu item
"Permitted xx progs." (xx = TV, radio or AV). Press the "

OK

"

key and, in the setting win-
dow, enter the programme
positions with the numeric
keys or use the 

– +

key to

select the desired programme
positions.
• Press the "

OK

" key to save

the new settings.

c) TV start – TV end

Activate the childlock as des-

cribed in step a). In the setting

window, use the cursor control

key to select the start and end

times and enter the desired

times with the numeric keys.

Press the "OK" key to save the settings.

Protecting the childlock settings with your code

• Use the cursor control key to select "Code" and enter your

personal code (password) with the numeric keys.

Make a note of this code, since the child lock can be

deactivated only if the correct code is entered !

• Press the "

OK

" key to save the settings.

• Press the "

EXIT

" key to close the TV menu.

• Switch off the TV set with the 

key.

The childlock is not fully activated until the TV set is

switched off.

Deactivating the childlock

If the childlock is active, a window requesting your personal

code is displayed each time the TV set is switched on. Ente-

ring the correct code enables the TV set and it can then be

used normally until it is switched off again. To cancel the

childlock function, proceed as described in step a), above,

and set the childlock to "Inactive".

☞

☞

É

Factor

y setting

Code: 0000

✂

Prog A

Kabel 1 Prog B

-----

Prog C

----- Prog D

-----

Prog E

----- Prog F

-----

Permitted AV prog.

Permitted radio prog.

Permitted TV prog.

Settings

Recording control

Timer setting

Timer control

Reminder

Childlock

Timer

Enter programme

position and save

with     .

: clear.

OK

I I

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 51

Содержание Axio 32 FHD CT

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды