21
10. SAT Radio Operation
Programming radio stations
Many SAT stations use so-called „sound subcarriers“ to transmit additional radio programmes. One SAT station can transmit several
additional radio programmes. Some radio stations are already programmed in the factory (see the SAT station table, „ASTRA radio
stations“). These can be assigned to programme positions with the aid of the menu „SAT programming“ (see Section 1).
Proceed as follows if you wish to programme a new station that is not listed in the SAT station table.
Example:
You want to programme the SAT radio station „NDR 2“ (frequency 11.582 MHz, polarisation horizontal, sound subcarriers
7.38/7.56 MHz).
(For station parameters please also refer to the teletext information).
1. Select a SAT radio program
position and set the LNC
supply
Red station
Blue SAT
table
radio table
2. Enter the station frequency
▲▼
>> weitere Einstellungen
Std, Pict., Sound
6 9 6 + S 0 4 H - G B
VTR1
ARD
ZDF
SAT 1
Videorec.1
Aerial
Aerial
Aerial
0
1
2
3
4
5
6
7
8
9
TV station table
?
MENU
return
Help
TV
TV picture
LNC pwr supply: H
22 kHz signal: On/Off
Polarizer: 1
Relay: On/Off
AFC: On/Off
AV
LNC pwr supply: H
22 kHz signal: On/Off
Polarizer: 2
Relay: On/Off
AFC: On/Off
AV
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 9 6 + S 1 0 C - G B
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
TV station table
—
—
—
—
—
—
—
—
Volume adjustm.
Muting
Adj. SAT sound
+00
On
?
MENU
return
Help
TV
TV picture
Sound mode:
Channel 1:
Channel 2:
Band width:
Deemphasis:
Stereo
7.02 MHz
7.20 MHz
130 kHz
PANDA
P r o g r a m
AV
In this menu, you must first set the polarisation for the
desired station.
In our example, the station NDR 2 uses horizontal
polarisation.
The polarisation can be selected with the
keys.
The 22 kHz signal must be set to match the satellite
being used, as described in step 3 on page 10.
If the station table with the blue hea-
der line now appears, see the instruc-
tions for Step 3.
+
-
The SAT radio station „NDR 2“ is a sound subcarrier of
the TV station „Nord 3“ and is transmitted by the
ASTRA satellite on the frequency
11.582
GHz.
Back to the example:
Enter 1 5 8 2 on the numerical keys.
After you have entered the frequency, the TV program
from the station „N3“ appears behind the menu on the
screen.
The menu for frequency input may differ, depending
on the model, as shown in the picture.
In the submenu
SAT sound settings
, you can set all
sound parameters required for a SAT radio station.
These settings apply only to the currently selected
program position.
You can also select the sound mode in this menu. The
possible settings are
MONO, STEREO
and
DUAL
(for
dual-channel transmissions).
1
2
5
8
MENU
red
-
+
-
+
3. Call the submenu „SAT
sound settings“ and set the
sound mode
Red station
Blue SAT
table
radio table
MENU
red
MENU
R
2x
H: 11,583 Nord 3
SAT-Frq.
Aerial control
696+S11E1-GB
>> weitere Einstellungen
SAT 1
40
Aerial
H: 11,582 Nord3
Std channel
Spec. channel
SAT-TV
SAT-RADIO
Aerial control
AV
3
44
45
46
47
48
49
Press this key on the remote
control
The screen displays
Explanation
