2-10
LT110C INSTRUCTION MANUAL
EN
02/2011
CHAPTER 2 - SAFETY
2.5 EMERGENCY & REMOTE STOP
BUTTONS
The emergency stop buttons connected to the
process control system stop the engine and the
crushing process after the safety function has been
triggered by pressing the buttons or pulling the
safety wires. The buttons and safety wires in the
conveyors only stop the conveyor in question.
Figure 2-9 Emergency stop buttons
The emergency stop buttons 1,2,3 and 4 as well as
the remote stops 5 and 6 stop the engine. The safety
switches 7 and 8 stop immediately the device in
question, and the process will be stopped according
to the sequence. See figures 2-9 and 2-10.
CAUTION!
The operation of the emergency stop
buttons must be checked weekly.
Reference
Description / location
Reference
Description / location
1
In the control center
3
In the control panel of the working
platform
2
In the hydraulic center
4
On the side of the engine center
3
1
2
4
