DRIVING INSTRUCTIONS
DRIVING INSTRUCTIONS
D100014616-EN
398 0 EN 2021-06-22
9
1.6.1. INCREASING THE GROUND CLEARANCE
CAUTION!
PROPERTY DAMAGE HAZARD
Can cause moderate injury or property damage.
If the machine is in the transport position and it needs to be driven up or down
a steep surface (for example a ramp), there may be a need to slightly unfold the
bottom deck side conveyor and adjust the screen angle to avoid damage to the
machine. Make sure that there is enough clearance under the machine before
driving the machine up or down on steep surfaces.
Prerequisites: The machine is positioned on a level ground, with the engine running. To start the engine, see
“Starting the engine”.
The need of increasing ground clearance can vary case-by-case. Increase the ground clearance according
to need but pay attention to how much room there is on top of the machine. The following figure shows the
overview of increasing the ground clearance.
NOTICE: Increasing the ground clearance is allowed to temporary use only.
1
2
3
4
Max. 18°
Max. 25°
Callout
Description
1
Screen and side conveyor in transport position
2
Mechanical locking opened and side conveyor unfolded
3
Side conveyor unfolded and screen raised upwards
4
Side conveyor carefully lowered on the transport support
Figure 10: Overview of increasing the ground clearance
