Made by ALL Engineering
Operation
Remark:
When the Adagio is fully connected and switched to
”on” the volume knob will turn anti clockwise to the lowest
position. Also the mute function will be activated the very first
time. To release the mute function one of the remote control
buttons should be used. In case of disconnecting the Adagio
from the mains power, this procedure should be repeated!
•
On/Standby switch :
To reduce power the Dac boards will be switched off in stand-by
mode. Just the front panel is activated to control the system and power consumption will be
reduced to 1.5 Watts.
•
Mute function:
By switching to “On” the mute function will be activated for five seconds.
When switching the Adagio to standby mode muting will be active again.
•
Source selection:
The digital inputs can be selected by using five small buttons on the front .
When switching the Adagio to “On”, by default the last selected source will be active.
•
Error indication:
When no digital data is coming in, the orange Remote /Error led above the
remote sensor will burn.
•
Remote indication:
When using the remote control the Remote/ Error led will flash rapidly.
