Made by ALL Engineering
•
XLR outputs
: Standard XLR line cables should be used to connect the dac to your (pre)
amplifier. The "Adagio" is designed conform the "Red book standard" so the maximum
output for the XLR output will be 4 Volts RMS or 1.4Volts RMS in case of using the -10dB
setting. Your (pre)amplifier should handle this output levels.
•
Mains inlet:
Use a power cable to a grounded power outlet.
•
Remote switch:
Depending the type of power amplifier it is possible to switch it “On” or
“Off” by using one or both of the remote switches. For connection a 3 pole XLR mini
connector can be used and depending the way your power amplifier should be powered, it
can be wired accordingly. The following connections are available:
A)
Common
B)
Normally closed when Adagio is switched off.
C)
Normally open when Adagio is switched off.
