background image

 

 

All-Engineering BV 
https://metrumacoustics.com 
[email protected]  
 

The USB receiver comes courtesy of M2TECH’s hiFaceTWO that supports up to 384kHz 
over I²S, which is fed directly to the FPGA. The Toslink input maxes out at 96kHz, while the 
Coax and AES inputs can handle up to 192kHz PCM data. Finishing off the back panel are 
the power switch and the IEC inlet for the included power cord. Up front resides the units 
On/Standby button and a series of buttons with associated blue LEDs for input selection. 

A DAC On Sound Steroids

 

The PAVANE gives you more weight, body, tonal richness, and a more natural sense of the 
space of the recording. Or to put it more plainly, it fleshes out your music more! 

Think clarity. The PAVANE does a wonderful job of presenting even the most complex 
music in a natural and inviting manner with every last ounce of nuance intact. There’s no 
artificial sounding edge, no sense of a flat cut-out image, basically none of digital’s nastier 
stuff. In some cases, this can also come with a somewhat dark and muddy sound but that is 
absolutely not the case with the PAVANE; 

think clarity

The PAVANE allows you to hear into the recording and the recording’s quality. This is 
somewhat of a good news/bad news proposition in that you’ll really hear what’s there. 

Pure & Simple

 

According to reviewers the PAVANE by Metrum Acoustics is clearly onto something with 
the new DACs and that something, according to many ears, is musical enjoyment. Pure and 
simple. 

The PAVANE is available in black or silver. The used top panel is a sandwich of steel and 4 
millimetres of tempered black coated glass and gives the PAVANE very distinctive looks. 

The PAVANE is build up with a double well damped frame and will avoid vibrations due to 
the use of bituminous material. Around this strong body beautiful shaped aluminium panels 
are used to make it even stronger. The chosen approach masks the use of screws from most 
important directions. As standard, a remote will be delivered to control the available digital 
inputs. 

 
 

 

 

note: 

 

The PAVANE will reach its maximum performance after a three to four 
weeks usage.

 

 

 

 

 

Содержание 1467a











Отзывы: