metrotek Bercut-MMT, Руководство по эксплуатации

Страница: 47 / 85

6.4 Arping 47
6.4 Arping
ARP table displays information only for devices that were already addressed.
In case it is necessary to connect to a network device not present in ARP
table, the
Arping program should be used (refer to Figure 6.5).
Figure 6.5. Arping Parameters Configuration
Arping — is a program to perform echo-request using recipient’s IP ad-
dress to determine its MAC address without ARP table [4]. This program
uses ARP.
After the program execution is completed, on ARP table update (in the
ARP tab), the information about the device in question will be displayed.
Test configuration is performed by filling out following fields:
• Destination — target node IP address for ARP request.
• Number of arping — is used to configure a certain quantity of ARP
requests.
• Interface — displays interface name to work with. Default interface
is defined by routing configuration. Changing of interface name is per-
formed by selecting a row in the drop-down list or with the help of F1
functional key.
Test execution starts on pressing the Start button or F6 functional key.
Bercut-MMT: Ethernet Networks Analysis