METROTEC GSM, Руководство по эксплуатации, Страница: 32 / 33

METROTEC
32
11 Technical data
Measurement range 100 % to 10
-31
bar O
2
Ambient temperature 0 to 45 degrees Celsius
Measurement accuracy +/- 0.3 mV of the sensor EMF
+/- 2 degrees Celsius
+/- 2% of the mA output
+/- 2% of the log oxygen partial pressure
Temperature input Thermocouple Type S
Heating-up time for sensors 10 to 15 minutes
Response time approx 2 seconds
Contact load capacity 2A, 24 V (ohmic)
Dimensions 160 x 260 x 260 mm (HxWxD)
Electromagnetic compatibility The equipment meets the requirements of Euro-
pean directive 89/336EWG and complies with the
following standards:
Interference transmission EN 61000-6-2
Immunity from interference EN 61000-6-4
The device can be used without restriction in res-
idential and industrial surroundings.
Power supply 230 Volt AC
Heating power approx.. 200 VA
Control power approx. 40 VA
Temperature of the measurement cell 700
o
C
Temperature detection element Thermocouple Pt 10Rh-Pt
Temperature of measurement gas max. 50
o
C
Flow of measurement gas required At least 8 litre per hour with bypass closed
Moisture Dew point must be filtered out.
It is important to avoid presence of condensate
Dust Dust must be filtered out
Solid particles exceeding 25
m
must be filtered
out