background image

Ion Technologies MSE50V

Sewage Pump

OPERATION MANUAL

Dated: 03/30/2020

Document Name: MSE50V_OM

Page 1 of 8

www.ionproducts.net

S

afety

 W

arningS

Thank you for purchasing your Ion Technologies 

Pump. To help ensure years of trouble-free operation, 

please read the following manual carefully.

CAUTION/  WARNING: 

Read these safety 

warnings  first  before  installing,  servicing,  or 

operating any pump.

DANGER:

 Keep pump equipment out of 

the reach of children! Failure to follow the 

directions given could cause serious risk to individuals 

or objects.

Before Installation

This manual contains important information for the safe 

use of this product. Read this manual completely and 

follow the instructions carefully. Reasonable care and 

safe methods relating to the installation and operation 

of this product should be practiced. Check local codes 

and requirements before installation.

WARNING: 

Risk  Bronze/brass  fitted  pumps 

may contain lead levels higher than considered 

safe for potable water systems. Government agencies 

have determined that leaded copper alloys should not 

be used in potable water applications.

WARNING: 

Installation, wiring, and junction 

connections must be in accordance with the 

National Electric Code and all applicable state and 

local  codes.  Requirements  may  vary  depending  on 

usage and location.

WARNING: 

Installation  and  servicing  is  to  be 

conducted by qualified personnel only.

DANGER: 

Rotating machinery. Amputation or 

severe  lacerations  can  result.  Keep  clear  of 

suction and discharge openings. DO NOT insert 

fingers into pump with power connected.

WARNING:

 Always wear eye protection when 

working on pumps. Do not wear loose clothing 

that may become entangled in moving parts. 

DANGER:

 Pumps build up heat and pressure 

during operation. Allow time for pumps to cool 

before handling or servicing. 

 

DANGER: 

Hazardous Voltage can shock, 

burn, or cause death. This pump is not intended 

for use in swimming pools or water installations where 

human contact with pumped fluid is possible.

DANGER: 

Risk of electrical shock. To reduce 

risk of electrical shock, always disconnect 

pump from power source before handling. Lock out 

power & tag.

WARNING:

 Do Not use these pumps in water 

over  145°F.  Do  not  exceed  manufactures 

recommended  maximum  performance,  as  this  could 

cause the motor to overheat.

2 YEAR

WARRANTY

EXTENSION

2 Year Warranty Extension Available

Add an additional 2 years to the standard 1 year warranty  

(from date of installation) for a total of 3 years of  

complete warranty protection.

For more information, visit

store.ionproducts.net/product/m33v-50v-warranty-extension

Содержание ion Take Control MSE50V









Отзывы: